#Allwinner a64 benchmark 64 Bit#
#Allwinner a64 benchmark serial#
#Allwinner a64 benchmark driver#
#Allwinner a64 benchmark Patch#
#Allwinner a64 benchmark android#

I moved the module inside the kernel directory,Р”Р„nd at last I got the module loaded by the kernel.

#Allwinner a64 benchmark driver#

The build process produced the mali.ko driver and put it into /lib/modules/4.13.y/extra directory. Then I compiled the mali kernel module on the OPi using the instructions from Free Electrons having care to export the shell variables this way:Р”В®xport CROSS_COMPILE=arm-linux-gnueabihf. deb packages on my orange pi pc, rebooted and I got kernel 4.13.y working. Once I did that, compilation went fine, installed the proper.

#Allwinner a64 benchmark Patch#

disable suffix and patch the patch (no pun) Zador pointed above because the DTS section to be edited is in file sunxi-h3-h5.dtsi and not in sun8i-h3.dtsi. Finally I managed to compile the sunxi-next kernel coming with armbian (4.13.y).

It has two user names: root and fa and the password for both is 'fa'.I'm back.

Here is a setup where we connect a NanoPi A64 to a PC via the PSU-ONECOM and you can power on your A64 from either the PSU-ONECOM or the board's MicroUSB:.

#Allwinner a64 benchmark serial#

If you can see the blue LED flashing it means your board is working and UbuntuCore is being loaded.Р”РЋ) To make it easy you can connect an HDMI monitor, a USB mouse and keyboard to your A64 board.Р”Сћ) If you want to do kernel development you need to use a serial communication board, ie a PSU-ONECOM board, which will allow you to operate the board via a serial terminal.

Insert a TF card with UbuntuCore image files into your NanoPi A64, connect the board to a 5V/2A power source the board will be automatically powered on.

If the green LED is on and the blue LED is blinking this indicates your NanoPi A64 has successfully booted.Р”Тђ Work with Ubuntu-Core 5.1 Run Ubuntu-Core

After this writing process is done insert this card into your NanoPi A64's TF card slot and power on (with a 5V/2A power source).

On the utility's main window select your TF card's drive, the wanted image file and click on 'write' to start flashing the TF card. Insert a TF card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator.

Extract the and win32diskimager.rar files.

#Allwinner a64 benchmark android#

Attention: the 'dd' command under Linux doesn't work for flashing Android image Windows utility for flashing Android image. Nanopi-a64_friendlycore-xenial_3.10.65_Р”Р„ Light Ubuntu-core(16.04) system with a Qt Embedded GUI library Get the following files from download link to download image files (under the officail-ROMs directory) and the flashing utility(under the tools directory):

РµВ·СњРµВ®вЂЎ 8G C10 High Speed class10 micro SD card:Р”В¤.3 Make an Installation TF Card 4.3.1 Get Image File.

SanDisk TF128G MicroSDXC TF 128G Class10 48MB/S:.

SanDisk TF 8G Class10 Micro/SD TF card:.

The following cards are what we used in all our test cases presented here: To make your NanoPi A64 boot and run fast we highly recommend you use a Class10 8GB SDHC TF card or a better one.

#Allwinner a64 benchmark 64 Bit#

A Host computer running Ubuntu 16.04 64 bit system.USB keyboard and mouse, and a USB HUB would be better.microSD Card/TFCard: Class 10 or Above, minimum 8GB SDHC.For more details refer to the document schematicsР”Р‡or more details please refer to dimension file in dxf 4 Get Started 4.1 Essentials You NeedР”В«efore starting to use your NanoPi A64 get the following items ready.All pins are 3.3V(In our test the real output was 3.1V), output current is 5mA.The VDD_5V is connected to MicroUSB's VBUS It can take power input from the MicroUSB or the VDD_5V pin from the Debug Port.

MIPI DSI clock, positive differential signal MIPI DSI clock, negative differential signal MIPI DSI data, positive differential signal MIPI DSI data, negative differential signal

HREF/HSYNC signal to CPU from camera modules Vertical synchronization to CPUРіР‚Р‚from camera modules Regular GPIO, control signals output to camera modules

Temperature measuring range: -40РІвЂћС“ to 80РІвЂћС“Р”Р€ Diagram, Layout and Dimension 3.1 Layout.

LED: Power Indication x 1, System LED x 1.

GPIO: 2.54mm pitch 40pin-header, compatible with Raspberry Pi's GPIO.

Serial Debug Port: 2.54mm pitch 4pin-header.

PMU Power Management: AXP803, support software power-off.

Ethernet: One Gigabit Ethernet (RTL8211E).

GPU: Mali400MP2, Supports OpenGL ES2.0, OpenVG1.1.

CPU: Allwinner A64, 64-bit Quad-core to 1.152GHz, DVFS.

It has MIPI-DSI and DVP interfaces, GPIO pin-header compatible with Raspberry Pi and a serial debug port. It has Ethernet, IR receiver, Video/Audio input and output. The NanoPi A64 is a small board with comprehensive interfaces, ports and features. A UbuntuCore and a UbuntuMATE image files are available from FriendlyElec. The NanoPi A64 is a new high performance and low cost board designed by FriendlyElec.It uses Allwinner's 64-bit A64 quad-core SoC(ARM Cortex-A53).